These heaters are made of Copper sheathed Tubular heating element filled with high grade insulation powder & kanthal coil at the centre which is brazed to a Brass flange / S.S.Flange. Heaters are nickel chrome plated and are provided with earthing Terminals. A metallic cap is provided for protection of Terminals.
These heaters are made of Nicrohome wire sealed inside a Steel tubular high temperature grade pipe, which is compacted along with high grade MGO allowing it to withstand high insulation resistance, later the element are brazed to a Cast Iron Flange/ Brass flange / S.S.Flange / and are provided with a Thermostat pocket, earthing terminal, & cap.
These heaters are designed to provide efficient heating which ensures that the Oil flash point is not achieved in case of non failure of temp. controller or sensor.
Flanged Flameproof Immersion Heater
The threaded flanged flameproof heaters are made from specially selected tube which ensures that heaters do not burst and damage the surroundings, the tubes are welded onto a forged flange which ensure leak proof structure.
A robust flameproof terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.
Removable Flameproof Immersion Heater
The range of flameproof core removable cartridge heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.